Features:
Resistivity of deionized water: >15MΩ.cm
Output capacity: 250-500 liters/h
2 pump and two stage RO system: utilizing two stages allows for higher purification rates, resulting in better quality water by removing more contaminants.
Integration design: this system combines various components into one compact unit, reducing floor space and simplifying the design process for efficient water purification.
Advanced PLC control system: the PLC control system monitors and manages operations, providing alerts for issues like lack of feed water, full tanks, and abnormal pressure levels.
User-Friendly touch screen panel: the touch screen displays system status and allows control of pumps and valves, with optional automatic data storage through RS232/USB connectivity.
Reliable safety features: water and electricity are separated, using low-voltage equipment. Multiple alarms ensure safety for conditions like no feed water and equipment overloads.
Good extension capability: deionized water produced can be used as feed for Smart-D, Master-D, and Dura series, enhancing water quality to meet top ASTM and USP standards.
Flow Schematic
Specifications
Central R2E 250 | Central R2E 500 | |||
Output(25°C)-Edi water* | 250 liters/hour | 500 liters/hour | ||
Deionized water quality | ||||
Resistivity | >15MΩ.cm | |||
RO water quality | ||||
Conductivity - 2nd stage RO water | 1-5µs/cm* | |||
Feed water requirements | Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 | |||
Flow process | Quartz sand+ activated carbon+ micro filter+ 1st stage RO+ 2nd stage RO+EDI module | |||
Dimension and weight | Length×Width×Height: 170×78×180cm/ Weight: about 300Kg | |||
Electrical requirements | AC380V, 50/60Hz | |||
Power | 6KW | 7KW | ||
Standard configuration | Main body (Including 1 set of cartridge) | |||