Features:
Resistivity of ultrapure water: reach to 18.2MΩ.cm.
Double wavelength (185&254nm) ultraviolet lamp module: this module can inhibit bacterial growth and decrease total organic carbon (TOC) levels.
2 kinds of monitoring system: online resistivity monitor & portable TDS/conductivity test pen.
LCD controlling system and real-time feedback: the LCD controlling system serves as the user interface, providing real-time feedback on system performance, water quality, and operational status.
Timing and quality dispensing: this ensure that the water is dispensed at right time and quality and can regulate flow.
Producing single stage RO water and ultrapure water: you can get RO water and ultrapure water in a device, which can save your cost and improve efficiency.
Easy-to-replaceing cartridge: independent cartidges design, with fast adapters, easy to repalce and running in low cost.
Whole plastic shell with high-strength: excellent ergonomic design,avoid rusting and keep clean,to meet GLP standard.
Flow Schematic
Specifications
Model |
Standard |
Eliminating endotoxin |
Low TOC |
Synthesizing |
Smart-S15 |
Smart-S15UF |
Smart-S15UV |
Smart-S15UVF |
|
Smart-S30 |
Smart-S30UF |
Smart-S30UV |
Smart-S30UVF |
|
Output(25°C)* |
15series-15 liters/hour, 30 series-30 liters/hour |
|||
Flow rate |
Up to 2 liters/minute(with pressure tank) |
|||
Pure water outlet |
2: reverse osmosis water, ultrapure water |
|||
Ultrapure water quality |
||||
Resistivity(25°C) |
18.2MΩ.cm |
|||
TOC* |
<10ppb |
<10ppb |
<3ppb |
<3ppb |
Bacteria |
<0.01cfu/ml |
|||
Particle(>0.1µm) |
<1/ml |
|||
Endotoxin |
N/A |
<0.001Eu/ml |
N/A |
<0.001Eu/ml |
RNases |
N/A |
<1pg/ml |
N/A |
<1pg/ml |
DNases |
N/A |
<5pg/ml |
N/A |
<5pg/ml |
RO water quality |
||||
Ion rejection rate |
97%-99% (new RO membrane) |
|||
Organic rejection rate |
>99%, when MW>200 Dalton |
|||
Particles and bacteria rejection rate |
>99% |
|||
Feed water requirements |
Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 |
|||
Dimension and weight |
Length×Width×Height:410×220×420mm / Weight: about 18Kg |
|||
Electrical requirements |
AC100-240V, 50/60Hz |
|||
Power |
72W |
|||
Standard configuration |
Main body (Including 1 set of cartridge)+15 liters pressure tank+ TDS/conductivity test pen |
|||
Cartridges
Item no. |
Commodity |
Approximate replacement term /set |
|
PC-M-PP |
5µm spun fiber cartridge |
2-6 months |
|
PC-PP-ZK |
Special spun fiber cartridge |
2-6 months |
|
PC-AC-B-ZK |
Special active carbon block cartridge |
6 months |
|
RO-100GPD |
100 GPD reverse osmosis membrane |
12-24 months |
|
RO-200GPD |
200 GPD reverse osmosis membrane |
12-24 months |
|
PTC-MBR-K |
Mixed bed resin cartridge |
1000 liters pure water |
|
PTC-UPPR-K |
Ultrapure polishing resin cartridge |
1000 liters pure water |
|
TF-(0.45+0.1)µm-S |
(0.45+0.1)µm terminal filter |
- |
|
UF-5000D |
MWCO5000D UF cartridge |
- |
|
LAMP-(185nm&254nm)-10W-K |
Double wavelength(185&254)nm uv lamp |
9000 hours |
|
LAMP-254-10W-K |
254 nm wavelength uv lamp |
9000 hours |
|