Features:
Resistivity of deionized water: >15MΩ.cm
Output capacity: 250-500 liters/h
2 pump and two stage RO system: utilizing two stages allows for higher purification rates, resulting in better quality water by removing more contaminants.
Integration design: this system combines various components into one compact unit, reducing floor space and simplifying the design process for efficient water purification.
Advanced PLC control system: the PLC control system monitors and manages operations, providing alerts for issues like lack of feed water, full tanks, and abnormal pressure levels.
User-Friendly touch screen panel: the touch screen displays system status and allows control of pumps and valves, with optional automatic data storage through RS232/USB connectivity.
Reliable safety features: water and electricity are separated, using low-voltage equipment. Multiple alarms ensure safety for conditions like no feed water and equipment overloads.
Good extension capability: deionized water produced can be used as feed for Smart-D, Master-D, and Dura series, enhancing water quality to meet top ASTM and USP standards.
Flow Schematic
Specifications
Central R2E 250 |
Central R2E 500 |
|||
Output(25°C)-Edi water* |
250 liters/hour |
500 liters/hour |
||
Deionized water quality |
||||
Resistivity |
>15MΩ.cm |
|||
RO water quality |
||||
Conductivity - 2nd stage RO water |
1-5µs/cm* |
|||
Feed water requirements |
Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 |
|||
Flow process |
Quartz sand+ activated carbon+ micro filter+ 1st stage RO+ 2nd stage RO+EDI module |
|||
Dimension and weight |
Length×Width×Height: 170×78×180cm/ Weight: about 300Kg |
|||
Electrical requirements |
AC380V, 50/60Hz |
|||
Power |
6KW |
7KW |
||
Standard configuration |
Main body (Including 1 set of cartridge) |
|||