Features:
Made of HDPE (High-density polyethylene): HDPE is an ideal material for water purification systems due to its corrosion and chemical resistance, durability, low maintenance needs, thermal stability, non-toxic properties and cost-effectiveness.
Independent power control and automatic operation: the system features independent power control, allowing for automatic operation without manual intervention, enhancing user convenience.
Integrated components: this system integrates level control, a pressure pump, a buffer tank, and inlet valves into a single unit, streamlining the water supply process.
No connection to main circuit required: there is no need to connect to the main pure water circuit, as the system can operate automatically based on the liquid level in the tank.
Optional UV lamp module: an optional UV lamp module is available to inhibit bacterial growth and reduce total organic carbon (TOC), improving water quality.
Specifications
Model |
PWS I-T100R-P12-3G * |
PWS -200S-4008 ** |
|
Shape & volume of tank |
Roundness: 100, 200 liters |
Roundness: 500, 1000, 2000 liters |
|
Material of tank |
HDPE (High-density polyethylene) |
||
Specifications of pump |
Maximum flow rate |
3, 5, 7, 10, 12 liters/min (Optional) |
70, 100 liters/min (Optional) |
Vertical self-priming height |
2 meters |
2 meters |
|
The rated stop pressure |
0.45Mpa±0.4Mpa |
0.3Mpa±0.4Mpa, 0.35Mpa±0.4Mpa |
|
Max pressure/pump lift |
About 0.8Mpa/80meters |
About 0.3Mpa/30meters, About 0.35Mpa/35 meters |
|
Volume of buffer tank |
12 liters |
1 liter |
|